Natural stone from Denizli, Turkey
Split face ledger panels, cut in Denizli.
Travertine and marble ledger stone panels and split face mosaics for importers, distributors and stone yards. Panels in 6 × 24, 6 × 18 and 6 × 12 inch, 11 colours, packed in crates and shipped by the container.
11 colours of 6 × 24 panel
The 6 × 24 inch panel is the size North American installers ask for by name, and the one we make in the most colours. Each card shows the panel laid up as a wall.
The range
Five products. Three panel sizes and two kinds of mosaic, all from the same stone.
Split face ledger panel 6 × 24
The standard North American panel. 11 colours.
11 colours →
Split face ledger panel 6 × 18
A shorter panel for narrow walls and columns.
1 colour →
Split face ledger panel 6 × 12
The small panel, for tight spaces and detail.
2 colours →
Split face mosaic strips
Free length strips, 2.1 cm thick, in three widths.
3 colours →
Tumbled mosaics
Tumbled travertine bricks, 3 × 6 and 3 × 8 in.
3 colours →
Why buy from Lidamer
Denizli is where the stone is
Denizli is Turkey's travertine capital. The quarries, the block yards and the cutting lines are all within a short drive, so the stone does not change hands on its way to your crate.
Cut to North American sizes
Panels are made in inches, 6 × 24, 6 × 18 and 6 × 12, so they drop straight into the specifications and price lists your customers already use.
One square foot a panel
A 6 × 24 panel covers exactly one square foot of wall. Your quote, your crate count and your customer's order all use the same number.
Talk to the people who load the crates
Write or WhatsApp us and you reach the factory in Denizli, not an agent. We answer in English and Turkish.
Ordering
Minimum order, lead time, packing and loading port are confirmed in writing with every quote, for the products and the port you name.
Tell us the products, the colours and the port, and we send the minimum order, lead time, crate packing and price for that order in writing. Ask for a quote →
Installed
Ledger stone and mosaic walls in homes, lobbies and around fireplaces.
Guides
Straight answers to the questions stone buyers ask before an order: how much to buy, which stone, and how it gets from Denizli to your yard.
- What is split face stone?
- How many ledger panels do you need?
- Travertine, marble or quartzite ledger panels?
- Split face mosaic or ledger panel: what is the difference?
- Importing natural stone from Turkey: a buyer's checklist
- Shipping natural stone from Turkey to the USA
- Stacked stone fireplace: choosing and installing ledger panels
Questions buyers ask
What is a split face ledger panel?
Natural stone split into strips, so the face is the rough surface of the break rather than a cut, then bonded into a single staggered panel. It gives the look of a dry-stacked stone wall and installs much faster than laying stones one by one.
How many panels do I need?
Divide the wall area in square feet by the panel's face: a 6 × 24 panel covers 1 sq ft, a 6 × 18 covers 0.75 and a 6 × 12 covers 0.5. Add 10 to 15 percent for cutting.
Can ledger panels go outdoors?
Yes, natural travertine and marble are used on exterior walls. In climates with freezing winters, seal the stone and install it over a substrate and with a mortar rated for exterior use.
What is the difference between travertine and marble panels?
Travertine has natural pores and warm beige, gold and silver tones. Marble is denser, with fewer pores, and gives the whites and greys. Both split well and both are quarried around Denizli.
Do you sell retail?
No. We sell wholesale to importers, distributors, stone yards and contractors, by the crate and by the container.
Tell us the colours and the quantity.
Send the products, colours and square footage you need, and the port you ship to. We reply with a price and a loading date.